the wall mini-greenhouse to protect plants from the cold, and do not take too much space. You can create a mini-greenhouse on your own, use one long wooden wine racks and a clear acrylic sheet - Acrylic -. Using a hammer, gently push the wall wine rack, and remove all nails as possible. Save the wall, you will need it.
Making a sloping roof. Measure 3 inches down from the top front corner on each side of the box and take a straight line from this point on the upper back corner. Cut along each line, using a hand saw. Cut two strips of 1.5 cm from the wall of the box, he was released early.
Glue strip in the middle of each side to create a framework to support the shelf. When the glue dries, paint the frame and wooden slats. Using dimensional wine box as a template, cut the Plexiglas door, and your greenhouse roof rack.
Strip cut pieces fit around the edge of Plexiglas door and the roof, and then put them on your end. Glue the roof. When dry, place the box and attach depending on the door with wood screws. Screw the door hinge. Glue the handle.
or you can refer to this guide for complete guide Click Here!
No comments:
Post a Comment